Description
What it is
A rotary selector switch for electric ranges and wall ovens in the Frigidaire / Electrolux family. The switch carries the element load, so it is the part that fails when a burner stops heating on some settings but still works on others, or when the knob turns with no click.
Why a 3-pack
Ranges have several of these switches and they see the same duty cycle, so when one goes the others are usually not far behind. Three switches covers a full set on most models, and spares on the shelf turn the second failure into a ten-minute job.
Rating
240V, 8.5–16.8A, 1/3 HP — taken from the rating plate on the switch itself. Compare it with the switch you are removing before you order.
Replaces
316436001 — also marked 21C-560GW, M2 6123256 and SUNCON.
Fitting
Isolate the range at the breaker — 240V is lethal. Pull the knob, remove the back panel, photograph the terminal layout before you disconnect anything, then swap the switch and refit the wires one at a time.
Before you order
Send us the model number from the range rating plate and we will confirm the fit before you buy. If it does not fit, we replace it.
Trademark notice
Frigidaire, Electrolux, Crosley and the part numbers listed are trademarks of their respective owners. This listing is not affiliated with, endorsed by, or sponsored by any of them. Part numbers are given only to identify the switch this product replaces.
